how to seal vinyl on glass

Of course, I'd be happy to help! First off, you'll need a vinyl design, transfer tape, a scraping tool, and a sealant that's suitable for both vinyl and glass. Do make sure you have cleaned and fully dried the glass surface before you start.

The next step is to carefully apply your vinyl design on the glass. Use your scraping tool to make sure it adheres well. Starting from the center and moving outward can help avoid bubbles. Once it's on, you'll need to carefully remove the transfer tape.

To seal the vinyl, you'll apply your chosen sealant over the vinyl and the glass, following the product's instructions. Make sure you apply it evenly and ensure all edges of the vinyl are covered to protect it from peeling.

The drying time can vary depending on the sealant you choose, but generally, it's best to give it at least 24 hours to fully cure. After that, your vinyl should be sealed and protected!